Park City, Utah
Wood veneer for Park City projects
Rosebud Veneer supplies architectural veneer panels and raw wood veneer to designers, architects, and fabricators throughout Park City and the greater Utah area — shipped nationwide, cut and matched to order.
Products
Veneer available in Park City
-
Rift White Oak Veneer
Straight, linear rift-cut white oak with a clean vertical grain — the default choice for contemporary architectural interiors.
Rift White Oak Veneer in Park City → -
White Oak Veneer
White oak veneer across rift, quartered, and plain-sliced cuts, grades, and backers.
White Oak Veneer in Park City → -
Quartered White Oak Veneer
Quarter-sliced white oak showing the characteristic medullary ray fleck — traditional and highly figured.
Quartered White Oak Veneer in Park City → -
Fumed Rift White Oak Veneer
Ammonia-fumed rift white oak — deep, aged tone with the same tight linear grain, and no stain required.
Fumed Rift White Oak Veneer in Park City → -
Fumed White Oak Veneer
White oak darkened right through by ammonia fuming, reacting with the timber’s own tannins for color that will not sand away.
Fumed White Oak Veneer in Park City → -
Gray Dyed White Oak Veneer
White oak dyed through to a controlled, repeatable gray — consistent across flitches for large specifications.
Gray Dyed White Oak Veneer in Park City → -
Walnut Veneer
American black walnut with rich chocolate tones — the premium standard for cabinetry and architectural millwork.
Walnut Veneer in Park City → -
Quartered Walnut Veneer
Quarter-sliced American walnut with a straight, disciplined grain and even color across the leaf.
Quartered Walnut Veneer in Park City → -
French Walnut Veneer
European walnut with a lighter, warmer, more golden cast than its American cousin, and a livelier grain.
French Walnut Veneer in Park City → -
Walnut Crotch Veneer
Cut from the fork where the trunk divides — the dramatic plume or feather figure prized for tabletops and center panels.
Walnut Crotch Veneer in Park City → -
Walnut Claro Burl Veneer
Californian claro walnut burl — swirling eyes and color streaks over a warm chocolate ground. Highly limited.
Walnut Claro Burl Veneer in Park City → -
Quartered Beeswing Walnut Veneer
A fine, shimmering mottle across quartered walnut, named for its resemblance to an insect wing. Rare and highly specified.
Quartered Beeswing Walnut Veneer in Park City → -
Birdseye Maple Veneer
Hard maple carrying dense clusters of small conical "eyes" — a bright, energetic figure on a pale ground.
Birdseye Maple Veneer in Park City → -
Curly Maple Veneer
Rippling, three-dimensional curl across the grain that shifts as you move past it — also called tiger or flame maple.
Curly Maple Veneer in Park City → -
Quilted Maple Veneer
Large, billowing pockets of figure with extraordinary depth — the most dramatic of the maple figures.
Quilted Maple Veneer in Park City → -
Burl Maple Veneer
Dense clusters of dormant buds in pale maple — tight, swirling eyes with almost no directional grain.
Burl Maple Veneer in Park City → -
Mappa Burl Veneer
European poplar burl with a fine, map-like tracery of dark lines over a creamy ground — excellent dyed or natural.
Mappa Burl Veneer in Park City → -
Amboyna Burl Veneer
The burl of Southeast Asian narra — glowing orange-red with tight, brilliant eyes. One of the most valuable veneers in the world.
Amboyna Burl Veneer in Park City → -
Redwood Burl Veneer
Deep red-brown Californian redwood burl with dense, curling eye clusters — commanding at architectural scale.
Redwood Burl Veneer in Park City → -
Burl Bog Sequoia Veneer
Sequoia burl recovered from bog conditions, darkened by long submersion into smoky grays and browns. Extremely limited.
Burl Bog Sequoia Veneer in Park City → -
Olive Ash Burl Veneer
European ash burl with olive-toned streaking and swirling eyes over a golden ground — warm and richly patterned.
Olive Ash Burl Veneer in Park City → -
English Harewood Burl Veneer
Sycamore burl chemically treated to a silvery gray-green — the classic English harewood of fine cabinetmaking.
English Harewood Burl Veneer in Park City → -
Karelian Birch Burl Veneer
Northern birch with a dense, flame-like internal figure of dark flecks in honey-gold — a genuine rarity.
Karelian Birch Burl Veneer in Park City → -
Indonesian Madrone Burl Veneer
Fine, uniform burl eyes in warm pinkish-tan — one of the most consistent burls available in large sheet sizes.
Indonesian Madrone Burl Veneer in Park City → -
Quilted Bubinga Veneer
African bubinga with a rolling quilted figure over deep red-brown — spectacular in large sequenced panels.
Quilted Bubinga Veneer in Park City → -
Kevazinga Veneer
Rotary-cut bubinga taken through the buttress, producing swirling concentric bands of red and violet.
Kevazinga Veneer in Park City → -
Black Mottled Makore Veneer
African makore carrying a fine dark mottle over deep red-brown — restrained but unmistakably figured.
Black Mottled Makore Veneer in Park City → -
Curly Makore Veneer
Makore with a tight, even curl running across a warm red ground — a lustrous, shifting surface.
Curly Makore Veneer in Park City → -
Quilted Makore Veneer
Broad, rolling quilt figure in deep red makore — dramatic across full-height wall panels.
Quilted Makore Veneer in Park City → -
Quartered Ribbon Sapele Veneer
Quartered sapele showing the classic interlocked ribbon stripe that reverses in the light.
Quartered Ribbon Sapele Veneer in Park City → -
Sapele Pomelle Veneer
A dense field of small, bubbling "pomelle" blisters across sapele — like a suspended cloud of tiny domes.
Sapele Pomelle Veneer in Park City → -
Afromosia Veneer
A fine-textured West African hardwood in warm honey-brown, often specified as a sustainable teak alternative.
Afromosia Veneer in Park City → -
Mozambique Veneer
Also sold as ovangkol — an African hardwood with olive-brown ground and dark, decisive stripe.
Mozambique Veneer in Park City → -
Wenge Veneer
Near-black African hardwood with fine, close-set pale striping — the darkest natural veneer in common specification.
Wenge Veneer in Park City → -
Crotch Dibitou Veneer
Crotch-cut dibetou, the African walnut — a plume figure in warm golden-brown with a fine luster.
Crotch Dibitou Veneer in Park City → -
Fumed Figured Etimoe Veneer
Figured etimoe deepened by fuming — a rich, dark red-brown carrying a soft mottle.
Fumed Figured Etimoe Veneer in Park City → -
Curly Anigre Veneer
Pale golden African anigre carrying a fine, even curl — light, contemporary, and widely specified for hospitality interiors.
Curly Anigre Veneer in Park City → -
Figured Anigre Veneer
Anigre with a broader, more varied figure across a creamy gold ground — an even, luminous surface.
Figured Anigre Veneer in Park City → -
Curly English Sycamore Veneer
The palest of the figured veneers — near-white English sycamore with a tight, silvery curl.
Curly English Sycamore Veneer in Park City → -
Sawn European Beech Veneer
Sawn — not sliced — flat-cut European beech, giving a thicker leaf and a clean, even, pale surface.
Sawn European Beech Veneer in Park City → -
Tamo Ash Veneer
Japanese ash with a rare peanut-shell figure — a swirling, three-dimensional pattern unlike any other veneer.
Tamo Ash Veneer in Park City → -
Figured Eucalyptus Veneer
Warm pink-brown eucalyptus with a lively, shifting figure — a contemporary favorite for feature joinery.
Figured Eucalyptus Veneer in Park City → -
Eucalyptus Beeswing Veneer
A fine, close beeswing mottle across eucalyptus — a shimmering, insect-wing surface at close range.
Eucalyptus Beeswing Veneer in Park City → -
Figured Gray Dyed Eucalyptus Veneer
Figured eucalyptus dyed through to a controlled gray — the figure reads as light and shadow rather than color.
Figured Gray Dyed Eucalyptus Veneer in Park City → -
Fumed Eucalyptus Veneer
Eucalyptus deepened by ammonia fuming into a smoky brown, with the figure brought further forward.
Fumed Eucalyptus Veneer in Park City → -
Fumed Quartered Curly Eucalyptus Veneer
Quartered curly eucalyptus, fumed — a tight curl over a deep smoky ground, and one of the most striking panels we press.
Fumed Quartered Curly Eucalyptus Veneer in Park City → -
Fumed Quartered Larch Veneer
Quartered larch darkened by fuming — a strong, straight grain in warm smoky brown.
Fumed Quartered Larch Veneer in Park City → -
Macassar Ebony Veneer
Dramatic black and amber striping — the definitive luxury veneer, and unmatched in sequenced panel work.
Macassar Ebony Veneer in Park City → -
Royal Ebony Veneer
Pale straw heartwood shot through with decisive black streaks — the ebony that reads light rather than dark, though some leaves come through predominantly black.
Royal Ebony Veneer in Park City → -
Santos Rosewood Veneer
Violet-brown ground with dark, decisive striping — the widely available rosewood alternative for architectural work.
Santos Rosewood Veneer in Park City → -
Teak Veneer
Golden-brown teak with its characteristic oily luster — the enduring choice for mid-century and marine-influenced interiors.
Teak Veneer in Park City → -
Quartered Teak Veneer
Quarter-sliced teak with a straight, even grain and consistent color across the leaf.
Quartered Teak Veneer in Park City → -
Zebrawood Veneer
Bold, high-contrast dark striping over pale gold — graphic and immediately recognizable.
Zebrawood Veneer in Park City → -
Bloodwood Veneer
Intense, saturated red straight from the tree — the most vivid natural color in the veneer catalog.
Bloodwood Veneer in Park City → -
Tineo Veneer
Chilean tineo — a warm red-brown ground shot through with irregular dark streaks and flecks.
Tineo Veneer in Park City → -
Curly Koa Veneer
Hawaiian koa with a deep, rolling curl and golden-red color — scarce, and among the most beautiful veneers made.
Curly Koa Veneer in Park City → -
Satinwood Crotch Veneer
Crotch-cut satinwood — a luminous golden plume with the satin luster the species is named for.
Satinwood Crotch Veneer in Park City → -
Crotch Mahogany Veneer
The classic feather-figure mahogany crotch — the traditional centerpiece of fine period cabinetmaking.
Crotch Mahogany Veneer in Park City → -
Black Limba Veneer
Pale golden limba shot through with dramatic black and gray streaking — graphic, and a mid-century staple.
Black Limba Veneer in Park City → -
Bosse Pomelle Veneer
A dense field of small blistered pomelle figure over warm reddish-brown African bosse.
Bosse Pomelle Veneer in Park City → -
Douglas Fir Veneer
Vertical-grain Douglas fir — warm amber tones and a strong, straight grain for Pacific-Northwest and mid-century interiors.
Douglas Fir Veneer in Park City → -
Cherry Veneer
American black cherry — fine, even grain and a warm reddish brown that deepens with light and age.
Cherry Veneer in Park City → -
Figured Cherry Veneer
Cherry carrying curl or wave across the leaf, so the same warm ground picks up light and moves as you pass it.
Figured Cherry Veneer in Park City → -
Claro Walnut Veneer
Western walnut with far more color swing than the eastern black — honey through to near-purple, often in one leaf.
Claro Walnut Veneer in Park City → -
English Brown Oak Veneer
Oak colored all the way through by a fungus that stains the standing tree, giving a deep brown no dye reproduces.
English Brown Oak Veneer in Park City → -
Mahogany Veneer
The classic cabinet timber — straight to interlocked grain, an even reddish brown, and it works and finishes predictably.
Mahogany Veneer in Park City → -
Cypress Veneer
Pale golden brown with a soft, straight grain — a quieter face than the hardwoods, and lighter in weight.
Cypress Veneer in Park City → -
Spanish Cedar Crotch Veneer
The feathered figure taken from the fork of the tree, in the aromatic reddish timber traditionally used for humidors.
Spanish Cedar Crotch Veneer in Park City → -
Quartered Paldao Veneer
Gray-brown ground with dark irregular striping, quartered so the stripe runs straight down the leaf.
Quartered Paldao Veneer in Park City → -
Imbuya Pommele Veneer
Brazilian imbuya carrying pommele — the tight, overlapping blister figure that reads like light on water.
Imbuya Pommele Veneer in Park City → -
Olive Ash Crotch Veneer
Ash with the olive-brown heartwood streaking, cut from the fork so the grain feathers out from the center.
Olive Ash Crotch Veneer in Park City → -
Figured Makore Veneer
African makore with a mottled, shifting figure over a pinkish-red ground — restrained until the light moves.
Figured Makore Veneer in Park City → -
Flat Cut Etimoe Veneer
Etimoe sliced flat rather than quartered, so the darker striping opens into a broad cathedral rather than a straight line.
Flat Cut Etimoe Veneer in Park City → -
Quartered Ribbon Cerajera Veneer
Quartered to bring up an even ribbon stripe that alternates light and dark as the viewing angle changes.
Quartered Ribbon Cerajera Veneer in Park City →
Contact
Get Park City pricing
Tell us the species, the format, how many, and where in Park City it is going — we will come back with a price and a lead time. Or call (502) 330-5688 and talk it through.
Other locations